FAQ
Tutorial Video
Manuals
Datasheet
- What to do if the SD card cannot be initialized?
If you encounter difficulties when trying to initialize the SD card via the EZVIZ APP, below are some troubleshooting steps to resolve the issue for you:
1. Ensure both the firmware of your camera and EZVIZ APP are running on the latest version.
2. Ensure the SD card is class 10 or rated at UHS-1. The file format of the SD card should be FAT32 for capacities below 64GB and exFAT for capacities of 64GB and above. Click Here to view partial test results of SD card compatibility.
3. Power off your camera, remove and reinsert the SD card, power the camera on and then initialize the card again on the EZVIZ APP.
4. To further rule out the SD card issue, you may try to test with a different SD card or install the card in question on another EZVIZ device.
5. Try to factory reset your camera by holding the Reset button. This will turn the device to the default factory settings and might help resolve minor issues.
- How to deal with the system message “Device is offline”?
1. Please check the status of the indicator light first:
- If it is solid blue or flashing blue slowly, please refresh the home page on the EZVIZ APP to check whether the camera becomes online or not.
- If the indicator light is flashing red slowly, you can try the following two methods:
1) Please reboot your router as it may be experiencing connectivity and range issues.
2) Unplug your camera, wait for 10-30 seconds, then plug it back in to see if this solves the offline problem.
2. If the camera is still offline, you can try to reconfigure it by following the steps below:
- Connect your smartphone to your 2.4GHz home Wi-Fi network if your camera supports 2.4GHz only.
- Open your EZVIZ APP, tap the three-dot icon to enter the Device Settings page and tap the Wi-Fi button.
- Reset the device by pressing the reset button for a few seconds.
- Wait for a while, make sure the indicator light turns to flash blue quickly and tap Next.
- Check that your WIFI and password are correct. Then tap Next to connect to device AP.
- Please wait for the device to be configured and your device should be back online.
- What should I do if I have lost my EZVIZ device verification code
Please note that for most EZVIZ devices, there are usually three ways to obtain the 6 capital letter device code:
1. You can find it on the device label of the EZVIZ device. For doorbell devices such as DB1, please remove the device cover and scan the QR code with a third-party QR code scanner.
2. For some models, there is a QR code on the manual cover that contains device information (Note: there is no such information if the cover says "scan the QR code for detailed manual"). And you can use a third-party QR code scanner to scan it to get the device code.
3. Alternatively, you can find it in Digital Device Information or Device QR Code in Camera Settings-Device Information/About on the EZVIZ mobile app.
*Please note that for backend devices such as X5 and X4, the device code is the admin password that you set when you set up the device.
If you still need further assistance, please feel free to contact the EZVIZ support team at support@ezviz.com.
- What if my EZVIZ camera cannot connect to network via LAN cable
We understand that you may be experiencing difficulties connecting your device online via an Ethernet cable. To troubleshoot the issue, we recommend the following steps:
1. Verify the router and cable: Ensure that both the router and cable are in proper working order. You can try using a different cable or connecting the cable to a different port on the router to eliminate any potential issues.
2. Test the connection: After checking the cable and router, attempt to establish a connection again and see if the problem persists. If it does, proceed to the next step.
If the issue persists despite trying different cables and ports, we recommend reaching out to our EZVIZ support team for further assistance.
- How to subscribe to the CloudPlay?
Please follow the steps below:
1. Click the "3 dots" at the bottom right of the device window on the Home page to enter the "Device Settings" page.
2. Scroll down to find the "CloudPlay" and enter it.
3. Tap the "Subscribe" button.
4. Select the plan, agree to the "EZVIZ SERVICE AGREEMENT" and tap the credit card (or Paypal Checkout) box.
5. Enter your billing information and tap "Continue". Please make sure that your card supports Visa or MasterCard or American Express and that all information is entered correctly without unnecessary spaces.
6. Submit the payment to continue.
7. You have successfully subscribed to CloudPlay.
- What should I do if I am unable to log in on EZVIZ APP
If the APP prompts "Account username or password error" when you try to log into your account, below are some steps to resolve the issue for you:
Step 1. Please make sure your account information and region are correct.
Step 2. If correct, please ensure you input the correct account password and please be reminded that the password is case-sensitive.
Step 3. Alternatively, you may tap on “Forgot password" on the login page and follow the instructions on the APP to reset a new password and re-sign into your account.
If the issue persists after following the above steps and you need additional assistance, feel free to contact the support team by emailing support@ezviz.com
- What should I do if my camera goes offline frequently?
If your camera goes offline frequently, below are some troubleshooting steps to resolve the issue for you:
Step 1: Ensure both the firmware and EZVIZ app are running on the latest version.
Step 2: Ensure that your Wi-Fi network signal is good. You can check the signal by connecting your phone to the same WiFi your camera connects to, entering More page > Settings > Device Network Tools > Check WiFi signal.
Step 3: If not good, you can try to move the camera closer to your router, avoid obstacles and interference such as wall, elevator, microwave, washing machines, and Bluetooth devices.
Step 4: If your WiFi router has an adjustable antenna, try pointing it in various directions.
Step 5: Try to change the Wi-Fi channel to a less crowded one.
Step 6: If possible, disconnect some devices you seldom use from your router.
Step 7: If your camera supports Ethernet cable, you can also try to connect it using a cable.
Step 8: If you have two EZVIZ devices and the other one is working fine, you can also try to switch the locations to further determine the issue.
- How to set device’s notification schedule in mobile app?
Involved model:C6P/C4S/C2C/C6T/C6C/C3C/C6B/C3A/DB1/C8PF/C3X/C3WN/C3N
EZVIZ Cameras have the option of setting a schedule for alarm notification – this schedule will determine when you want to receive notifications and when you want the alarms turned off.
Here is the step-by-step guide to enable you to perform this task
1. Log into your EZVIZ app
2. Enter device settings > Alarm Notification
3. Enter Set Notification Schedule > tap Add time to add a time segment, repeat the process for all the days you want the schedule to operate
4. Use the check mark on the top right corner to save the schedule
For the settings of the time segment, please note the system is in military time, users cannot overlap the 0:00 mark. For next-day settings, please set 2 different time periods. For example, setting a schedule from 10:00 pm – 8:00 am(Monday – Tuesday), configure the notification schedule settings as thus; Monday 22:00 – Monday 23:59 | Tuesday 0:00 – Tuesday 08:00) Or, tap Repeat and select the day you want to repeat.
5. Once you have completed the scheduling process, exit that page and turn on the notification schedule switch.
Note: You do not have to turn on the main switch for the alarm notification when the system gets to the time segment set. The Alarm notification switch will be enabled and your scheduling will take effect.
Involved model:BC1C/BC1/BM1/BC2/H8c/HB8/EB8/H8/CB3/EB3/CB1
EZVIZ Cameras have the option of setting a schedule for alarm notification – this schedule will determine when you want to receive push notifications to your phone and when you want the alarms turned off.
Here is the step-by-step guide to enable you to perform this task
1. Log into your EZVIZ app
2. Enter device settings > Notification
3. Enable Receive Device Message > EZVIZ App Notification
4. Tap Notification Schedule
5. Tap Customized schedule and then Add Schedule(s) to add a time segment, repeat the process for all the days you want the schedule to operate
6. Tap Save on the top right corner to save the schedule
Note: You do not have to turn on the main switch for the alarm notification when the system gets to the time segment set, the Alarm notification switch will be enabled and your scheduling will take effect.