The smart video doorphone models, such as the HP7 and CP7, are designed to recognize and detect human shapes. When a human shape is detected, the device will automatically start recording, provided that a valid SD card is inserted or the CloudPlay service is activated. Therefore, these devices do not support continuous all-day recording; they only record when a human presence is detected.

If you encounter a situation where the indoor monitor of the smart video doorphone reboots every time the lock is unlocked, please note that this appears to be a result of excessive lock power, as the power supply to the lock must not exceed 12V/1.1A to ensure smooth unlocking. If this is exceeded, please try the following to see if the problem can be resolved:

1. You can try lowering the screen brightness in settings > Screen and Image > Screen Brightness on the monitor.

2. If adjusting the brightness does not help, consider connecting a relay as described in the user manual. To do this, connect the relay to the lock terminals (indicated by a key symbol) on the back of the doorbell. Then, connect the other end of the relay to the positive and negative terminals of the lock.

3. Alternatively, you can try using a power supply with a 24V 1.5A input to see if that resolves the issue.

By following these steps, you should be able to address the rebooting issue with your indoor monitor. If the problem persists, please consider reaching out to our technical support team at support@ezviz.com for further assistance.

If you are experiencing issues with opening or closing the gate using the EZVIZ app or the indoor monitor—such as the mechanism attempting to close but then automatically reopening, or the gate opening and closing on its own—please follow the steps below:

1. Ensure that both the monitor and the doorbell have the latest firmware versions. You can check this by going to the "Settings" of each device separately in the EZVIZ mobile app, then navigating to "Device Information > Device Version".

2. On the monitor, go to "Settings > Screen and Image" and then adjust the "Gate-opening Command Time" to 3s, 2s, 1s, 0.3s, and 0.1s, respectively, to see if this resolves the issue.

If the problem persists, please reach out to our support team at support@ezviz.com and provide the following information:

   - The serial numbers of the indoor panel and the outdoor intercom (doorbell).

   - A photo of the gate motor nameplate.

   - A photo of the current wiring setup.

   - A video demonstrating the issue.

   - The e-manual of your gate motor.

By following these steps, we hope to help you resolve the issue with your gate.

No, the smart video doorphone does not support RTSP or ONVIF. For optimal control and operation of the device, we recommend using the EZVIZ App.

No, the smart video doorphone does not support the addition of extra chimes.

The monitor can be connected to the electrical panel using a transformer. However, it is essential to ensure that the transformer outputs only 24V DC power at 1.5A, and that the positive and negative terminals are connected correctly.

No, the smart video doorphone does not support proximity cards from other brands.

Yes, you can integrate additional screens with your smart home video doorphone. Specifically, you can connect the doorphones with the SD7 smart screen. This is particularly beneficial for larger homes, as the SD7 extends the communication capabilities of your existing EZVIZ Video Doorphones.

By placing the SD7 in various areas of your home, such as the bedroom or kitchen, you can easily respond to doorbell rings without having to rush to a distant monitor. With just a few taps on the SD7, you can see who is at the door and grant access immediately.