If you have installed an SD card, but the camera is not recording to it, below are some troubleshooting steps to resolve the issue for you:

1. Try to test by enabling “Alarm Notification” or “Notification” in camera Settings, waving your hand in front of the camera lens until you receive the alarm notification, and then checking whether you could play back the footage to further determine the issue.

2. If no recordings, ensure both the firmware and EZVIZ app are running on the latest version.

3. Ensure the SD card is class 10 or rated at UHS-1. The file format of the SD card should be FAT32 for capacities below 64GB and exFAT for capacities of 64GB and above. (We do recommend you to click https://support.ezviz.com/faq/264 to check the compatibility of your SD card first.)

4. Ensure the installation orientation of the SD card is correct

5. Ensure the SD card is initialized on EZVIZ app before using and the status should be Initialized or Normal. You can check the status in camera settings>Storage Status>Memory Card or camera settings>Record List>Memory Card. If the status shows abnormal or uninitialized, try to format it again through EZVIZ app. (Before formatting, do remember to back up important files.)

6. To further rule out the card issue, you may try to test with a different SD card or install the card in question on a different EZVIZ device.

7. Try to factory reset your camera by holding the Reset button. This will turn the device to the default factory settings and might help resolve minor issues.

If the issue persists after following the above steps and you need additional assistance, feel free to contact the support team by emailing support@ezviz.com or the online chat at the bottom corner. Our team love to help!