EZVIZ no longer supports Internet Explorer 10 or earlier versions, and the site may not behave as expected. Please upgrade to a newer browser.
If you are using a wired connection, please follow as below：
1.Connect the LAN interface of NVR to that of router using Ethernet cable
2.Connect the camera to the same router or NVR’s WiFi
3.Power on the NVR and connect it to a local monitor using VGA or HDMI cable
4.Follow the wizard on the local monitor, create a new device password and complete the setup
5.Make sure “Wired Internet Mode” is selected in Configuration - Network - General - Selection of Network Mode
6.Go to “Menu” >> “Camera” >> “Search” >> “Add” to link the cameras
7.Log into the EZVIZ app > click on the “plus” tab to add a device >> scan the QR code shown on the screen or the device label
If you are using a 5GHz WiFi connection, please follow as below：
1.Connect the camera to the same router or NVR’s WiFi
2.Power on the NVR and connect it to a local monitor using VGA or HDMI cable
3.Follow the wizard on the local monitor, create a new device password and complete the setup
4.Make sure “5G Uplink Mode” is selected in Configuration - Network - General - Selection of Network Mode
5.Go to “Menu” >> “Camera” >> “Search” >> “Add” to link the cameras
6.Log into the EZVIZ app > click on the “plus” tab to add a device >> scan the QR code shown on the screen or the device label
